Input Cards

DI_OUT_FILE $\parbox{0.75\linewidth}{ {\textrm{\it{\hspace{5mm}{\underline{differentialinterf.raw}}}}}}$
$\parbox{\MY}{Output filename for complex real4 file with differential phase (in slant range system).}$



DI_IN_TOPOMASTER $\parbox{0.75\linewidth}{ {\textrm{\it{\hspace{5mm}{\underline{same as {\bf master result file}\xspace card}}}}}}$
$\parbox{\MY}{Specify this card if {\bf... ... the topo-pair. To obtain the orbit and other parameters for the topo master.}$



DI_IN_TOPOSLAVE $\parbox{.75\linewidth}{ {\textrm{\it{\hspace{5mm}result file name}}}}$
$\parbox{\MY}{Filename of the slave of the topo-pair. To obtain the orbit and other parameters for the primary slave.}$



DI_IN_TOPOINT $\parbox{.75\linewidth}{ {\textrm{\it{result file name}}}}$
$\parbox{\MY}{Filename of the interferogram {\bf result file}\xspace ... ... obtain the name and dimensions of the unwrapped (topography) interferogram.}$



DI_OUT_SCALED $\parbox{0.75\linewidth}{ {\textrm{\it{\hspace{5mm}filename}}}}$
$\parbox{\MY}{Filename for optional (debug) output of a real4 file with scaled (with ratio of perpendicular baselines) unwrapped topo interferogram.}$

Example of the cards for this step:

  c
  c
  comment   ___ DINSAR 3 PASS ___
  c
 DI_OUT_FILE         ./Outdata/difg.raw
  c DI_IN_TOPOMASTER  /data/project/topo/master.res // if 4 pass method
 DI_IN_TOPOSLAVE      /data/project/topo/slave.res
 DI_IN_TOPOINT        /data/project/topo/products.res
  c DI_OUT_SCALED    ./Outdata/scaled.raw           // debug