Next: Implementation Up: M_SIMAMP Previous: Input Cards Contents

Output Description

At successful exit the process control flag is switched on:

sim_amplitude:            1

The output (in the master result file) looks like:

%[float=h]
*******************************************************************
*_Start_sim_amplitude:
*******************************************************************
DEM source file:                        final_WAna.dem
Min. of input DEM:                      11
Max. of input DEM:                      2521
Data_output_file:                       Outdata/18226.sam
Data_output_format:                     real4
First_line (w.r.t. original_master):    1
Last_line (w.r.t. original_master):     29650
First_pixel (w.r.t. original_master):   1
Last_pixel (w.r.t. original_master):    4992
Multilookfactor_azimuth_direction:      1
Multilookfactor_range_direction:        1
Number of lines (multilooked):          29650
Number of pixels (multilooked):         4992
*******************************************************************
* End_sim_amplitude:_NORMAL
*******************************************************************

The output in the logfile is more verbose, specifying the results of the intermediate steps. Also go over the standard out in case of problems, with the SCREEN set to DEBUG level.

**Figure 6.1:** The orginal multilooked amplitude of the master image.
$\epsfig{file=Figures/simamp_18226amp.eps,width=\linewidth}$

**Figure 6.2:** The simulated amplitude of the master image.
$\epsfig{file=Figures/simamp_18226simamp.eps, width=\linewidth}$

Leijen 2009-04-14